-
Do your system support NLOS range from air to ground?
Yes. We have models which is 800Mhz and 1.4Ghz frequency. They have NLOS transmission ability. Such as: FPS-8408(HDMI 6-8KM), FPM-8416(12-16KM), FNS-8408(IP 6-8KM), FNM-8416(IP 12-16KM)
-
Can your system be encrypted?
Sure. All our systems are default AES-128Bit encryption. However on your request, we can do more complex encryption type.
-
With your Tx installed on the drone, how fast the drone can fly?
The top fly speed is 400km/h
-
Does the system have a vertical fly height requirement to achieve a better performance?
Our engineers suggest: 600feet vertical fly height for 5-8km transmission range, 1000feet for 10-20km and 1600feet for 30-50km.
-
What temperatures can the drones with the camera video transmission system fly?
All the system can normally work in -40 ~+ 85℃ environment.
-
What is the power output of the system?
We have a wide range of transmission system from 0dbm to 33dbm. Such as the model FIM-2405 and FIP-2405. Both of them are designed for 5km range. And their output power is 27dbm. The model FIM-2450 is designed for 50km range. Its output power is 33dbm. Please contact with our sales engineer to get the right system for your project.
-
Can we change the frequency if there is interference?
A software for parameters adjusting is offered to the system, and then the user can install the software in your PC and connect the system with your PC. Then the user is allowed to change the frequency by 1Mhz step.
-
What frequency does your microwave transmission system work?
| 800Mhz | 806~826 MHz |
| 1.4Ghz | 1428~1448 MHz |
| 2.3Ghz | 2304 ~ 2390 MHz |
| 2.4Ghz | 2402~2482 MHz |
| 2.5Ghz | 2500~2570 MHz |
-
Could users make video recording?
Yes. All our receivers have ethernet interface. Users can connect the Receiver with PC and recording the video in real time.
-
Could users can get real time video on PC and Monitor at same time?
Yes. Connecting the receiver with PC by Ethernet RJ45 Cable and open our TPlayer software. Then you can get real time video on PC. At same time connecting the receiver with Monitor by HDMI Cable. Users can also get real time video on it.
